POLYPLEX

Product Information (Provisional)

SARAFIL Transparent
SL560 & SL056

SARAFIL Transparent SL560 & SL056 types Polyester Film is designed to enhance adhesion to solvent, water based inks and coatings. It is used as base film for thermal lamination application for increased bond strength and adhesion.

Microns
(Gauge)

12 (48)

Type

1) SL56O : Chemically treated (wound Inside)
2) SLO56 : Chemically treated (wound Outside)

Typical Values

Properties	Unit	Test Method	10 (40) Micron (Gauge)
Nominal Thickness	Micron (Gauge)	PCL Method	12 (48)
Tensile Strength		ASTM D-882
MD	Kg/cm² (kpsi)		2150 (30.8)
TD	Kg/cm² (kpsi)		2250 (32.2)
Elongation At Break		ASTM D-882
MD	%		120
TD	%		110
Heat Shrinkage (150 Deg. C/30 Min.)		ASTM D-1204
MD	%		2.0
TD	%		1.6
Co-efficient Of Friction		ASTM D-1894
Static			0.55
Dynamic			0.49
Haze	%	ASTM D-1003	4.0
Light Transmission	%	ASTM D-1003	89
Surface Tension		PCL Method
Chemically Treated Side	Dyne/cm		56
Untreated Side	Dyne/cm		42

These properties can be changed to meet specific requirements of the customers.

The information given above, is to the best of our knowledge and experience. Some of the properties can be changed as a result of suppliers' efforts to improve upon the quality or production efficiency of the subject. The information is believed to be true and accurate and is not intended to violate any statutory condition or right of a third party. Polyplex makes no warranty, express or implied, as to the fitness of the product for any specific use or purpose. The above data is purely for reader's consideration, investigation and verification and should be read in conjunction with the conditions for sale or contract.