SARAFIL DFY type (Matte) Polyester Film has
been designed as base film specially designed for stringent
application like Stamping Foil and Release Film.
Microns
(Gauge)
12,
19 & 23 (48, 75 & 92)
Type
DFY
Typical Values
Properties
Unit
Test Method
12 (48) Micron (Gauge)
19 (75) Micron (Gauge)
23 (92) Micron (Gauge)
Nominal
Thickness
Micron
(Gauge)
PCL
Method
12 (48)
19
(75)
23 (92)
Tensile
Strength
ASTM
D-882
MD
Kg/cm2
(kpsi)
1800(25.8)
1800(25.8)
1800(25.8)
TD
Kg/cm2
(kpsi)
1700(24.3)
1700(24.3)
1700(24.3)
Elongation
At Break
ASTM
D-882
MD
%
105
105
105
TD
%
110
110
110
Heat
Shrinkage (200 Deg. C/20 Min.)
ASTM
D-1204
MD
%
4.0
(0.4) Neg
4.0
(0.4) Neg
4.0
(0.4) Neg
TD
%
0.0
1.0
1.0
Co-efficient Of Friction
ASTM
D-1894
Static
0.36
0.36
0.36
Dynamic
0.32
0.32
0.32
Gloss (60°)
%
Internal
42
40
38
These properties can be changed to meet the specific requirements
of the customers.
The information given
above, is to the best of our knowledge and experience. Some of the properties
can be changed as a result of suppliers' efforts to improve upon the quality or
production efficiency of the subject. The information is believed to be true and
accurate and is not intended to violate any statutory condition or right of a
third party. Polyplex makes no warranty, express or implied, as to the fitness
of the product for any specific use or purpose. The above data is purely for reader's
consideration, investigation and verification and should be read in conjunction
with the conditions for sale or contract.
These properties can be changed to meet the specific requirements
of the customers. 
