SARAFIL DFL type (Matte) Polyester Film has
been designed as base film for thermal lamination and
label application. This film has balanced shrinkage,
low gloss and excellent runnability.
Microns
(Gauge)
12,
23 (48, 92)
Type
DFL
Typical Values
Properties
Unit
Test Method
12 (48) Micron (Gauge)
23 (92) Micron (Gauge)
Nominal
Thickness
Micron
(Gauge)
PCL
Method
12
(48)
23
(92)
Tensile
Strength
ASTM
D-882
MD
Kg/cm2
(kpsi)
2000
(28.6)
1900
(27.2)
TD
Kg/cm2
(kpsi)
2100
(30.0)
2000
(28.6)
Elongation
At Break
ASTM
D-882
MD
%
110
115
TD
%
105
110
Heat
Shrinkage (150 Deg. C/30 Min.)
ASTM
D-1204
MD
%
2.0
2.0
TD
%
1.0
1.0
Co-efficient Of Friction
ASTM
D-1894
Static
0.40
0.40
Dynamic
0.30
0.30
Gloss (typical value)
60 Deg.
%
ASTM D-523
42
40
Haze
%
ASTM
D-1003
40
50
These
properties can be changed to meet specific requirements
of the customers.
The information given above, is to the best of our
knowledge and experience. Some of the properties can
be changed as a result of suppliers' efforts to improve
upon the quality or production efficiency of the subject.
The information is believed to be true and accurate
and is not intended to violate any statutory condition
or right of a third party. Polyplex makes no warranty,
express or implied, as to the fitness of the product
for any specific use or purpose. The above data is purely
for reader's consideration, investigation and verification
and should be read in conjunction with the conditions
for sale or contract.
These
properties can be changed to meet specific requirements
of the customers.
