SARAFIL Clear AOA1 & A1AO types Polyester
Film is one side pre-treated for slip and handling.
It is optically clear and has good transparency. It
is used in label, hologram applications and used wherever
high gloss is required.
Microns
(Gauge)
19,
23, 36 & 50 (76, 92, 142 & 200)
Type
1)
AOA1 : Pre-treated for slip (wound Outside)
2) A1AO : Pre-treated for slip (wound Inside)
Typical Values
Properties
Unit
Test Method
19 (76) Micron (Gauge)
23 (92) Micron (Gauge)
36 (142) Micron (Gauge)
50 (200) Micron (Gauge)
Nominal
Thickness
Micron
(Gauge)
PCL
Method
19 (76)
23
(92)
36 (142)
50
(200)
Tensile
Strength
ASTM
D-882
MD
Kg/cm2
(kpsi)
2000(28.6)
2000(28.6)
2000(28.6)
2000(28.6)
TD
Kg/cm2
(kpsi)
2100(30.0)
2050(30.0)
2100(30.0)
2000(30.0)
Elongation
At Break
ASTM
D-882
MD
%
125
135
145
135
TD
%
115
125
135
130
Heat
Shrinkage (150 Deg. C/30 Min.)
ASTM
D-1204
MD
%
1.6
1.6
1.6
1.6
TD
%
0.0
0.0
0.0
0.0
Co-efficient Of Friction
ASTM
D-1894
Dynamic
0.40
0.45
0.40
0.40
Haze
%
ASTM
D-1003
1.0
1.00
1.20
1.40
Light
Transmission
%
ASTM
D-1003
89
89
89
90
Surface Tension
Dyne/cm
PCL
Method
42
42
42
42
These properties can be changed to meet the specific requirements
of the customers.
The information given
above, is to the best of our knowledge and experience. Some of the properties
can be changed as a result of suppliers' efforts to improve upon the quality or
production efficiency of the subject. The information is believed to be true and
accurate and is not intended to violate any statutory condition or right of a
third party. Polyplex makes no warranty, express or implied, as to the fitness
of the product for any specific use or purpose. The above data is purely for reader's
consideration, investigation and verification and should be read in conjunction
with the conditions for sale or contract.
These properties can be changed to meet the specific requirements
of the customers. 
